[GUIDE] How to root Lenovo K3 note Easiest and install custom recovery[Easy][Step by Step]

To root Lenovo K3 Note, there are so many guides available on so many forums/websites but i found them incomplete. So I am providing you 3 safe and a step by step guides.

So lets start....

WARNING: DO NOT COPY OR STEAL ANY PART OF THIS GUIDE WITHOUT MY PERMISSION.
________________________________________________________________________________
________________________________________________________________________________

 GUIDE 1

Requirements:

1. Lenovo K3 Note Drivers(USB+Pdanet)------------DOWNLOAD(9.70MB)
2. ADB Fastboot and Recovery Files------------------DOWNLOAD(12.61MB)
3. SU.zip ---------------------------------------------------------- (DOWNLOAD)
4. A PC(Desktop/Laptop)
5. Some time...

Steps:

1. Download Drivers and Recovery(TWRP) from given links(Below in download section)

2. Extract K3Drivers.rar (use winrar/7zip) into a folder and you will find these two files:

3. Install both drivers (LePhone2.0 and PdaNetA4150) on your PC

4. Now Copy SuperSU(SU.zip) into root of internal storage Like this:

Now The tricky part starts...

5. Extract "ADB Fastboot and recovery Files" and you will find these files in it

6. Now Press Shift key+ right click and select "Open Command Prompt here", a black screen(command prompt will start):

7. Now enable Usb Debugging enable in your phone  by:

• Go to "Settings>About phone>Device information"
• Tap on  Build number several times, it will unlock your developer options
• Now go to Settings>Developer options>and tick USB Debugging

• Done now come to PC again

8. Connect your phone with your PC using a USB data cable

9. [Flashing Recovery] Now in command prompt screen which we have opened in step 6 type the following commands:

     9.1 Command 1: This Command will show devices connected as adb

adb devices

          it will show you devices connected as adb
       

      9.2 Command 2 : This command reboot your phone into bootloader

adb reboot bootloader

       9.3 Command 3 :

fastboot devices

       9.4 Command 4:

fastboot flash recovery recovery.img

       9.5 Command 5:

fastboot reboot

10. Well Done we have successfully flashed custom recovery(TWRP) on our device.
11. Now switch off/power off your phone again.
12. Boot into recovery:

• To boot into recovery Press Volume Up+Volume Down+ Power(Lock) simultaneously

13. ROOTING

• Now in recovery Select "Install"
• Select "SU.zip" from internal storage/memory.

       

• Swipe to Install

           

• Wait for few seconds and done
• Now select Reboot System

          

• CHEERS! You have Root access and SuperUser Installed :) 

14. Thanks


Method 2 and 3 (Will Post soon)

Any Doubt?? Confusion?? FEEL FREE TO COMMENT